Eliminating stickers & vinyl from a vehicle's paintwork can sometimes be problematic and if it is not undertaken appropriately damage can easily be imposed. The key to eliminating stickers & vinyl securely and effectively is to first apply heat which unstiffens the adhesive underneath and makes the vinyl itself laxer and more malleable.
A hair dryer should be used rather than a heat gun as a heat gun can get too warmed up which could result in the paint being raised off from the surface along with the vinyl.
First, the edges and corners of the vinyl or sticker should be warmed up. Hold the hairdryer about two inches away from the surface and keep it moving instead of holding it in one spot. If you are looking for a wrap removal services then you can have a look at our wrap removal process that will make your wrap removal job easy.
Once the edges and corners have been adequately heated up you should be able to tug them up nice and effortlessly. You should use something that will not scrape or harm the paintwork in any way for this, a plastic ice scraper with some tape attached to protect the paint or an unsharpened knife with a microfiber towel wrapped around it would work well. You can check this out to get tips on easy wrap removal from your vehicle.
Once a corner or edge has been pulled up you should carefully continue to pull away the sticker trying to follow the shape of it to prevent it from tearing and having to reheat and start again.
Depending on the size of the vinyl you may not be able to eliminate it all at once. In this case, you should reapply heat to the next doable area and then continue to mildly pull it up off the surface of the paintwork.
This should be detached with a designated tar & glue remover. It should be applied directly to the affected area, left to immerse for a short while then removed with a microfiber towel. You may require repeating this procedure a few times if the adhesive residue is persistent.